HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
Comware Based
cancel
Showing results for 
Search instead for 
Did you mean: 

Vlan 4800G 24-port

 
gera
Occasional Advisor

Vlan 4800G 24-port

I set regular vlan.But I get line protocol and interface current state Down.

Vlan-interface11 current state: DOWN

Line protocol current state:DOWN

Description: NT

The Maximum Transmit Unit is 1500

Internet Address is 10.4.11.254/24 Primary

IP Packet Frame Type: PKTFMT_ETHNT_2, Hardware Address: 0020-9c6b-a72b

IPv6 Packet Frame Type: PKTFMT_ETHNT_2, Hardware Address: 0020-9c6b-a72b

I can’t get what its wrong.

3 REPLIES
Fred_Mancen_1
Super Advisor

Re: Vlan 4800G 24-port

Is there any host connected to the switch using the VLAN 11? Is there a trunk port that permits the traffic passing of VLAN 11? If there's no host connected to a port using the VLAN 11 or trunk ports up with the VLAN 11 permitted, the interface VLAN 11 will not came up.



;-)

gera
Occasional Advisor

Re: Vlan 4800G 24-port

Thanks again Fred_Mancen.I will check.
gera
Occasional Advisor

Re: Vlan 4800G 24-port

Until u not connect network device to the switch port with this vlan, state status is DOWN.