Comware Based
cancel
Showing results for 
Search instead for 
Did you mean: 

Vlan transmission without different subnet

rneuville
Occasional Contributor

Vlan transmission without different subnet

Hi !



First of all sorry for my english :)



I have a huge problem since a long time ago.



We use a lot of 4200g, 5500 switchs.



My problem is :



I have 2 computer and one server. I want the server to be seen by both computer. I want the two computers CANT see themselves but of course communicate with the server.



The 3 machines are on the same LAN, same subnet. i use the vlan 1 & 2 for the server, the vlan 1 for one of the computer and the vlan 2 for the last computer.



So my question : Is it possible ? If it is how ? I tried to set up the ports as access, trunk, hybrid, tag or untagged and i cant do what i want....



Please i need help.



Thanks a lot.



3 REPLIES
vangass
Frequent Advisor

Re: Vlan transmission without different subnet

Hi,



On 5500 switches there is "port isolate" command (don't know about 4200 series). Add those two computers to isolate group - not the server and see the manual about it, maybe it helps.



Best regards,


V.



rneuville
Occasional Contributor

Re: Vlan transmission without different subnet

Hi !



Thanks for your idea but i have to use vlans because the server must see all the computers and in the future i will create more vlans with more interactions between them.



Thanks.



rneuville
Occasional Contributor

Re: Vlan transmission without different subnet

Please... help :-(