HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
Comware Based
cancel
Showing results for 
Search instead for 
Did you mean: 

Voice VLANs and Trunk/Hybrid Port Types

 
L1nklight
Valued Contributor

Voice VLANs and Trunk/Hybrid Port Types

I am trying to figure out what the difference is between a Trunk Port and a Hybrid port. I am working on a voice vlan configuration and I've seen voice vlans be configured on both trunk types and hybrid types. I will be using PoE Cisco phones so I am assuming I want to go with a trunk port. Can anyone add some clarification as to the advantages of both types?

3 REPLIES
johnk3r
Respected Contributor

Re: Voice VLANs and Trunk/Hybrid Port Types

Hi !

See the post below will help you ...

 

 

http://h30499.www3.hp.com/t5/LAN-Routing/Trunks-VLANs-Question/m-p/6692234#M1188

**************************************
ATP FLEXNETWORK V3 | ACSA
L1nklight
Valued Contributor

Re: Voice VLANs and Trunk/Hybrid Port Types

So in the case of using VoIP phones, in Cisco world, I am used to using a trunked port. Is it advisable to use a hybrid in Comware world even if the Voice VLAN is tagged?

johnk3r
Respected Contributor

Re: Voice VLANs and Trunk/Hybrid Port Types

I usually use trunk port on VOIP configuration ... it works normally. But you should not have problems using hybrid port

**************************************
ATP FLEXNETWORK V3 | ACSA