HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
Comware Based
cancel
Showing results for 
Search instead for 
Did you mean: 

Voice Vlan configuration

 
cwhitten1971
Occasional Visitor

Voice Vlan configuration

New to the 3com world of switches and have a quick question I hope can be answered here. Are the voice vlan commands on the 4200g for IP phones or are they generic enough to apply to any voice traffic that I want to prioritize? I'm looking for a quick way to apply a COS of 7 and DSCP of 48 on all traffic on vlan 20. From what I have read, I could make vlan 20 the voice vlan with "voice vlan 20 enable" then on each port, enable the voice vlan and then set the qos with "voice vlan qos 7 48". Is that it or do I need to create acl's and a qos profile to apply to ports?



Thanks

1 REPLY
manuel.bitzi
Trusted Contributor

Re: Voice Vlan configuration

If you like to priorize all packets in the vlan: thats it.

But when you like to priorize only the voicetraffic on the vlan, you have to set acls and qos.



regards

Manuel

H3CSE, MASE Network Infrastructure [2011], Switzerland