HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
Comware Based
cancel
Showing results for 
Search instead for 
Did you mean: 

comware 7 - management interface - question

 
SOLVED
Go to solution
Eby
Occasional Contributor

comware 7 - management interface - question

Is it possible to disable/omit AAA authentication on management interface(M-GigabitEthernet0/0/0) ?, but when accessing thru vlan interfaces, the admin/operators should get tacacs+ AAA.

Is this possible ?. And what "line vty" parameters should be used.

Thanks,

1 REPLY
aybra
HPE Pro
Solution

Re: comware 7 - management interface - question

Hello Eby

it's not possible, the OOB management interface is just separate management port to acccess the same vty line as the vlan access.

Hope this can answer your question.

best regards

I am an HPE Employee

Accept or Kudo