HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
Comware Based
cancel
Showing results for 
Search instead for 
Did you mean: 

ip forward-broadcast and ACL

 
HaVecko
Occasional Visitor

ip forward-broadcast and ACL

 Hello,

 I have  A5500 EI Switch (JG240A) with latest available Comware (5.20.99, Release 2221P02) and I want to configure Wake On Lan between VLANs. I have followed the documentation and configuration of switch is (computer which is sending magic packet is in VLAN 1, computer which is intended to be woken is in VLAN 2):

 

ip forward-broadcast
#

interface Vlan-interface1
 ip address 10.0.1.1 255.255.255.0
#

interface Vlan-interface2
 ip address 10.0.2.1 255.255.255.0
 ip forward-broadcast acl 3001
#

Advanced ACL  3001, named -none-, 1 rule,
ACL's step is 5
 rule 0 deny ip
#

 

 WOL works like a charm but it seems that ACL configured on ip forward-broadcast doesn´t take any effect. Does anybody knoh how get it to work?

 

 Regards

 HaVecko

2 REPLIES
Apachez-
Trusted Contributor

Re: ip forward-broadcast and ACL

Didnt you apply the ip helper on the wrong vlan?
Vince-Whirlwind
Honored Contributor

Re: ip forward-broadcast and ACL

That's what I was wondering, but he says it "works a charm", so I decided I was just confused.