HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
Comware Based
cancel
Showing results for 
Search instead for 
Did you mean: 

irf member isseu

 
niwai0328
Occasional Visitor

irf member isseu

Hi 

I have HP comware 5510 Two Switches. I configured Irf in both switch. when I configure irf member and priority there was a mistalke with member numbers in both switches. So now I wanted to remove the irf configuration but unfortunatly I couldn't delete the "irf member X priority XX" statment from the switch.

 

I have tried with so many undo cmds. Finaly I was erase my statrup config. But the thing is same. The irf member priority statment is not deleting. any one has a experianced ?

1 REPLY
HP-Browniee
Respected Contributor

Re: irf member isseu

Hello

You should not undo this command but renumber it back to 1.

 

Kind regards