link two 4200G switches

[dellse]

We have a 4250T switch and a 4200G switch. They are linked by using 2 of the gigabit ports on the 4200G to the up link and down link ports on the 4250T. we think we have a problem on the 4250t switch as network connections are lost to workstations connected to this switch on a regular basis. We are thinking about replacing this with another 4200G switch. What is the best way to link two 4200G switches?

[Fred_Mancen_1]

The 4200G switches can be connected as the same way you already use, or using CX4 10G 2-Port Local Connection modules. The second option increases the bandwidth and is not too expensive regarding the 10G connection. Then you can create a clustered stack, with a master and a slave switch.

HTH