HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
cancel
Showing results for 
Search instead for 
Did you mean: 

password lost

 
sshoaib
Occasional Contributor

password lost

I have three 3 com superstack4 5500 in a cascade config. The password is not working anymore for telnet and web access. What is the best to password recover? Also I tried connecting to console with console cable and hyper terminal - no success. Its not even connecting to console - no response from serial connction. Also don;t know why the password changed as no body changed it.

Thanks

 

 

P.S. This thread has been moved from Switching > Legacy to Comware-Based. - Hp Forum Moderator

2 REPLIES
sshoaib
Occasional Contributor

Re: password lost

Solved it - not sure why the password was reset - tried telnetting with blank password with success and then put a new password in. Still not sure why console did not work. Any idea?

Thanks


sshoaib wrote:

I have three 3 com superstack4 5500 in a cascade config. The password is not working anymore for telnet and web access. What is the best to password recover? Also I tried connecting to console with console cable and hyper terminal - no success. Its not even connecting to console - no response from serial connction. Also don;t know why the password changed as no body changed it.

Thanks


 

sshoaib
Occasional Contributor

Re: password lost

Stil I would like to solve why the console did not respond with a console cable