Comware-Based
cancel
Showing results for 
Search instead for 
Did you mean: 

"Clean" flash: | HPE 5900AF

SOLVED
Go to solution
mferna
Occasional Contributor

"Clean" flash: | HPE 5900AF

Hi Guys,

I only have 20% left space in flash:/, this is the list that i have in my switch:

Directory of flash:
0 -rw- 11285504 Nov 12 2013 18:08:20 5900_5920-cmw710-boot-r2210.bin
1 -rw- 8470528 Jan 01 2011 01:40:00 5900_5920-cmw710-boot-r2311p01.bin
2 -rw- 7308288 Jan 01 2011 18:45:40 5900_5920-cmw710-boot-r2311p06.bin
3 -rw- 11313152 Jan 06 2011 18:13:30 5900_5920-cmw710-boot-r2418p06.bin
4 -rw- 11305984 Jun 23 2016 09:18:12 5900_5920-cmw710-boot-r2422p01.bin
5 -rw- 11755520 Feb 08 2018 19:13:30 5900_5920-cmw710-boot-r2432p05.bin
6 -rw- 33753088 Nov 12 2013 18:08:20 5900_5920-cmw710-system-r2210.bin
7 -rw- 54225920 Jan 01 2011 01:42:01 5900_5920-cmw710-system-r2311p01.bin
8 -rw- 54290432 Jan 01 2011 18:47:30 5900_5920-cmw710-system-r2311p06.bin
9 -rw- 66527232 Jan 06 2011 18:15:48 5900_5920-cmw710-system-r2418p06.bin
10 -rw- 69196800 Jun 23 2016 09:20:34 5900_5920-cmw710-system-r2422p01.bin
11 -rw- 76951552 Feb 08 2018 19:16:10 5900_5920-cmw710-system-r2432p05.bin
12 -rw- 185330 Nov 11 2015 12:45:18 diag_MGR-SW-DTC-01_20151113-124335.tar.gz
13 -rw- 225032 Nov 17 2015 17:24:46 diag_MGR-SW-DTC-01_20151119-172250.tar.gz
14 drw- - Jan 04 2011 20:36:24 diagfile
15 -rw- 735 Jan 05 2011 17:03:22 hostkey
16 -rw- 3319 Feb 08 2018 19:17:12 ifindex.dat
17 -rw- 1160 Feb 08 2018 20:36:16 lauth.dat
18 drw- - Jan 01 2011 00:01:08 license
19 drw- - Jan 04 2011 20:33:05 logfile
20 drw- - Jan 04 2011 22:39:37 pki
21 drw- - Jan 04 2011 20:36:24 seclog
22 -rw- 591 Jan 05 2011 17:03:23 serverkey
23 -rw- 27779 Feb 08 2018 19:17:13 startup.cfg
24 -rw- 280308 Feb 08 2018 19:17:14 startup.mdb
25 drw- - Feb 08 2018 19:24:09 versionInfo

524288 KB total (106036 KB free)

 

Today I update the last .ipe file that is in the HPE website r2432p05.bin

What can i delete from the flash:/ without damage?

Sincerely,
Marcos Fernandes

3 REPLIES
VoIP-Buddy
Trusted Contributor
Solution

Re: "Clean" flash: | HPE 5900AF

mferna,

You have 5 versions of code on the switch.  Do a display boot and see what versions are your next version and backup.  Delete /unreserve the ones that are not the next boot or backup and you should recover a bunch of space.

mferna
Occasional Contributor

Re: "Clean" flash: | HPE 5900AF

 

Software images on slot 1:
Current software images:
flash:/5900_5920-cmw710-boot-r2432p05.bin
flash:/5900_5920-cmw710-system-r2432p05.bin
Main startup software images:
flash:/5900_5920-cmw710-boot-r2432p05.bin
flash:/5900_5920-cmw710-system-r2432p05.bin
Backup startup software images:
None

So I can delete every old .bin file (boot and image) right?

I don't have any backup software, how can i put one in it? Just for precaution. 

Sincerely,
Marcos Fernandes

VoIP-Buddy
Trusted Contributor

Re: "Clean" flash: | HPE 5900AF

Hi!

You can delete old boot and system images that are not R2432P05.

If you decide to set backup images you can't delete that version either.

Use the boot-loader command to specify the files and set them as the backup images.  You can use the ? to have the CLI tell you what the next parameter is to walk you through that setup.

Regards,

David