Comware Based
cancel
Showing results for 
Search instead for 
Did you mean: 

receive discards errors on Switch 5500G-EI cascade ports

IcyBla5t
Occasional Contributor

receive discards errors on Switch 5500G-EI cascade ports

Hello

 

Have a stack of 8 5500G

 

Am seeing lots of recieve discard errors on my cascade ports for example today so far have seen

32,066,766 on cascade port 4/2/2

 

have found that Receive Discards indicate that received packets could not be delivered to a high-layer protocol because of congestion or packet errors

 

The ports are 24gb cascade ports not even being utilised 30%

 

Is this a bug , a red herring , or any one seen this type of issue before

 

Cheers for any info

 

 

P.S. This thread has been moved from ProCurve / ProVision-Based  to Comware-Based. -HP Forum Moderator

 

 

1 REPLY
lehmann1984
Occasional Contributor

Re: receive discards errors on Switch 5500G-EI cascade ports

yesterday i read the command reference and i believe that i should ignore this errors on cascade ports.