Comware Based
cancel
Showing results for 
Search instead for 
Did you mean: 

reverting back port link-mode to bridge error

SOLVED
Go to solution
joco_ph
Occasional Advisor

reverting back port link-mode to bridge error

Hi,

 

I was playing with my new A5500-EI and set port 24 to route via port link-mode route command.

 

Now i plan to change it back to bridge mode but i get error  " This mode is not supported on this interface " .

 

Tried also to issue   undo port link-mode route    but it says wrong parameter.

 

Please advise. thanks.

 

joco

4 REPLIES
paulgear
Esteemed Contributor
Solution

Re: reverting back port link-mode to bridge error

I haven't used routed mode on ports, but it sounds like pretty silly bug, so i would be trying a firmware upgrade as my first option.  Most 5500-EIs still seem to come out of the factory with r2202, even though r2208 has been released for over a year, and r2215 was posted sometime in the first half of this year.

Regards,
Paul
joco_ph
Occasional Advisor

Re: reverting back port link-mode to bridge error

happening again on my second 5500.   will try to update firmware and give update. thanks.

joco_ph
Occasional Advisor

Re: reverting back port link-mode to bridge error

updated firmware , now its good. thanks paulgear
paulgear
Esteemed Contributor

Re: reverting back port link-mode to bridge error

Good to hear!
Regards,
Paul