switch config for teap

[yur86]

Hello. 

In the companys network we have cisco ISE, so clients need to pass authentication. Clients PC have Windows 10 as his OS. Wireless and wired profile of PC configured for use TEAP protocol for user and machine authentication. Clients can connet to the network by wireless [WLC (wireless lan controller) is cisco appliens] and wired [HP switches (for example J8698A)]. When user connect by wireless,  he pass machine and user authentication successful. When user connetc by wired, he pass machine success and user not success.  Switch 5412 has version the last version - K.16.02.0026.  Please tell me how to set up aaa on the switch for teap to work properly.

[akg7]

Hello,

If I am not wrong TEAP is for wireless user authentication.

Please refer EAP identifier compliance for 802.1x pn Pg. 742 from below link:

https://support.hpe.com/hpesc/public/docDisplay?docLocale=en_US&docId=a00076265en_us

Thanks!