Comware Based
cancel
Showing results for 
Search instead for 
Did you mean: 

switch hp 5130

 
anask
Occasional Visitor

switch hp 5130

Hello,

I lost the image of the switch HP : switch hp 5130 

Please, could you give an advice to restore the image knowing that in each time when i want to reset the hp switch i lost the OS because in this device i don t have the buttomn of reset,

I'm waiting your response, thank you 

4 REPLIES 4
akg7
HPE Pro

Re: switch hp 5130

Hi,

Could you please explain the issue in detail?

Have you set the boot loader?

Thanks!

I am an HPE Employee

Accept or Kudo

vladi0782
Advisor

Re: switch hp 5130

You could download the software image from this page specifying the part number of the Switch
and also download the Release Notes where you specify how to perform the upgrade
 
Be happy for this moment. This moment is your life
Highlighted
Giri12
HPE Pro

Re: switch hp 5130

Use the below config example to set the boot-loader. This will prevent your device from loosing the firmware.

<HPE>display boot-loader
Software images on slot 1:
Current software images:
  flash:/5130hi-cmw710-boot-r1122p02.bin
  flash:/5130hi-cmw710-system-r1122p02.bin
Main startup software images:
  flash:/5130hi-cmw710-boot-r1122p02.bin
  flash:/5130hi-cmw710-system-r1122p02.bin
Backup startup software images:
  None
<HPE>dir
Directory of flash:
   0 -rw-    10720256 Aug 08 2008 20:00:00   5130hi-cmw710-boot-r1122p02.bin
   1 -rw-    61771776 Aug 08 2008 20:00:00   5130hi-cmw710-system-r1122p02.bin
   2 drw-           - Jan 01 2013 00:00:17   diagfile
   3 drw-           - Jan 01 2013 00:00:25   license
   4 drw-           - Jan 02 2013 00:00:13   logfile
   5 drw-           - Jan 01 2013 00:00:17   seclog
   6 drw-           - Jan 01 2013 00:00:35   versionInfo
<HPE>boot-loader file boot flash:/5130hi-cmw710-boot-r1122p02.bin system flash:/
5130hi-cmw710-system-r1122p02.bin all backup
This command will set the backup startup software images. Continue? [Y/N]:y
Verifying the file flash:/5130hi-cmw710-boot-r1122p02.bin on slot 1...Done.
Verifying the file flash:/5130hi-cmw710-system-r1122p02.bin on slot 1.............Done.
The images that have passed all examinations will be used as the backup startup software images at the next reboot on slot 1.
<HPE>display boot-loader
Software images on slot 1:
Current software images:
  flash:/5130hi-cmw710-boot-r1122p02.bin
  flash:/5130hi-cmw710-system-r1122p02.bin
Main startup software images:
  flash:/5130hi-cmw710-boot-r1122p02.bin
  flash:/5130hi-cmw710-system-r1122p02.bin
Backup startup software images:
  flash:/5130hi-cmw710-boot-r1122p02.bin
  flash:/5130hi-cmw710-system-r1122p02.bin
<HPE>

 

Hope it helps


Accept or Kudo
VoIP-Buddy
HPE Pro

Re: switch hp 5130

Is the switch able to boot into Comware or are you left at the Bootrom menu?

Regards,

David

Accept or Kudo