Comware Based
cancel
Showing results for 
Search instead for 
Did you mean: 

transparent-non-std

rah322
Occasional Contributor

transparent-non-std

Can anyone help explain what the "dot1x transparent-non-std enable" configuration command does?  

I'm assuming it's got something to do w/ additional RADIUS request attributes but I haven't a clue as to what non-standard attributes it would apply to.

[10.245.248.2]dot1x transparent-non-std ?
   enable Transport the non-standard attribute enable
[10.245.248.2]dot1x transparent-non-std

 

Switch is an older 3Com 5500.

3Com Corporation
Switch 5500G-EI Software Version 3Com OS V3.03.02s168p23
Copyright (c) 2004-2014 3Com Corporation and its licensors, All rights reserved.
Switch 5500G-EI uptime is 1 week, 0 day, 5 hours, 12 minutes

Switch 5500G-EI 48-Port with 1 Processor
128M bytes SDRAM
16384K bytes Flash Memory
Config Register points to FLASH

Hardware Version is REV.C
CPLD Version is 002
Bootrom Version is 5.05
[Subslot 0] 48GE+4SFP Hardware Version is 00.00.00
[Subslot 2] 2 STACK Hardware Version is REV.C

 

TIA,

--Raf