Comware Based
cancel
Showing results for 
Search instead for 
Did you mean: 

trunk between hp 5308xl & hp a5120ei

Takkari
Occasional Advisor

trunk between hp 5308xl & hp a5120ei

We are trying to setup a 4 port trunk between hp 5308xl and hp 5120ei series switch to accommodate load balancing and increase throughput. After doing some research we have decided to go with static lacp as the trunking protocol.
There is a link that's connected to our application servers and it is in a specific vlan, vlan 5.
Any suggestions on how to get this up and running effectively?
Thanks!


1 REPLY
Takkari
Occasional Advisor

Re: trunk between hp 5308xl & hp a5120ei

To those who are networking experts/professionals...

Will this configuration work for my scenario:

 

On HP 5308xl:
interface b15-b16
name "Link to a5120ei"
exit
interface d15-d16
name "Link to a5120ei"

trunk B15, B16, D15, D16 trk1 lacp

 

 


On HP A5120EI :
#interface Bridge-Aggregation1
description Link to 5308xl
port link-type trunk
port trunk permit vlan 10
link-aggregation mode dynamic
#
interface GigabitEthernet1/0/45
port link-mode bridge
port link-type trunk
port trunk permit vlan 10
port link-aggregation group 1
#
interface GigabitEthernet1/0/46
port link-mode bridge
port link-type trunk
port trunk permit vlan 10
port link-aggregation group 1
#
interface GigabitEthernet1/0/47
port link-mode bridge
port link-type trunk
port trunk permit vlan 10
port link-aggregation group 1
#
interface GigabitEthernet1/0/48
port link-mode bridge
port link-type trunk
port trunk permit vlan 10
port link-aggregation group 1

---------------------------------

 

This is a production system and I cannot have a lot of downtime to test this. I need a working config... 

Thanks!