Comware Based
cancel
Showing results for 
Search instead for 
Did you mean: 

voice VLAN does not recognize some ports in SW 3com 4500

 
adrisan_hpp
Occasional Visitor

voice VLAN does not recognize some ports in SW 3com 4500

I configured my switche 4500 with feature voice vlan mode auto. There are two ports with the same configuration and only one  take right ip address.  For example
#
interface Ethernet1/0/15
 stp edged-port enable
 port link-type trunk
 port trunk permit vlan 1
 broadcast-suppression pps 3000
 voice vlan enable
 packet-filter inbound link-group 4999 rule 0
#
interface Ethernet1/0/1
 stp edged-port enable
 port link-type trunk
 port trunk permit vlan 1
 broadcast-suppression pps 3000
 voice vlan enable
 packet-filter inbound link-group 4999 rule 0
#
display vlan 350

#
 VLAN ID: 350
 VLAN Type: static
 Route Interface: configured
 IP Address: 192.168.35.15
 Subnet Mask: 255.255.255.0
 Description: VLAN DE VOZ
 Name: VLAN 0350
 Tagged   Ports:
  Ethernet1/0/1            Ethernet1/0/2            Ethernet1/0/6            
  Ethernet1/0/7            Ethernet1/0/8            Ethernet1/0/9            
  Ethernet1/0/11           Ethernet1/0/12           Ethernet1/0/13           
  Ethernet1/0/19           Ethernet1/0/24           
 Untagged Ports:
  Ethernet1/0/18           GigabitEthernet1/0/27    


the port 1/0/15 is not showing between Ports in Voice VLAN  and I dont know what else can i check.