Comware Wireless / Unified Series
cancel
Showing results for 
Search instead for 
Did you mean: 

HP 525 (WW) Aways Restarting

 
Highlighted
Helder_Santos
Occasional Visitor

HP 525 (WW) Aways Restarting

Hello

I have an HP 525 WW (JG994A) that is behaving a little bit strange.

It's been tidy for a while and now I need to get it up and running in my company.

When I turn it on it's always on loop and it doesn't start.
I've tried Reset but without success.
I know it's a discontinued device, but maybe someone has some help they can give me.

 


****************************************************************************
* *
* HP HP-Device-default BootWare, Version 1.09 *
* *
****************************************************************************
Copyright (c) 2010-2015 Hewlett-Packard Development Company, L.P.

Compiled Date : Mar 23 2015
CPU Type : ATHEROS AR9550
CPU L1 Cache : 32KB
CPU Clock Speed : 720MHz
Memory Type : SDRAM
Memory Size : 256MB
Memory Speed : 560MHz
BootWare Size : 512KB
Flash Size : 128MB
CPLD Version : 006
PCB Version : Ver.C


BootWare Validating...
Press Ctrl+B to enter extended boot menu...
Starting to get the main application file--flash:/hp52x_fit.bin!
The main application file does not exist--flash:/hp52x_fit.bin!
Starting to get the backup application file--flash:/backup.bin!
The backup application file does not exist--flash:/backup.bin!
Starting to get the secure application file--flash:/secure.bin!
The secure application file does not exist--flash:/secure.bin!
Booting App fails!
Read value fail,Use Default
not Support Type!
Trying to get the IP address from the DHCP server......
DHCP server's IP address is 10.8.0.192
Client's assigned address is 10.8.16.2
DNS domain name got from DHCP server is ptsecuritas.local
DNS server's IP address is 10.8.0.240
Default Gateway's IP address is 10.8.16.1
This client's subnet mask is 255.255.255.192
The length of option 43 is: 0
Change State : Idle to Broadcast Discovery
Lwapp status machine init fail, the system will reboot.
[State : Idle] Reset request, rebooting the AP
Rebooting......

System is starting...
Press Ctrl+D to access BASIC-BOOTWARE MENU
Booting Normal Extend BootWare
The Extend BootWare is self-decompressing................................
Done!

****************************************************************************

2 REPLIES 2
spikkels
Occasional Contributor

Re: HP 525 (WW) Aways Restarting

probably missing image to boot from. when it starts up enter the extended boot menu by pressing Ctrl+B when prompted to. check the files and maybe upload a new image and set it as primary boot. 

 

Hope this helps

Highlighted
Helder_Santos
Occasional Visitor

Re: HP 525 (WW) Aways Restarting

Where can I find an image? What is the procedure to install a new image?

I try maiby all options...but I'm not getting

****************************************************************************
* *
* HP HP-Device-default BootWare, Version 1.09 *
* *
****************************************************************************
Copyright (c) 2010-2015 Hewlett-Packard Development Company, L.P.

Compiled Date : Mar 23 2015
CPU Type : ATHEROS AR9550
CPU L1 Cache : 32KB
CPU Clock Speed : 720MHz
Memory Type : SDRAM
Memory Size : 256MB
Memory Speed : 560MHz
BootWare Size : 512KB
Flash Size : 128MB
CPLD Version : 006
PCB Version : Ver.C


BootWare Validating...
Press Ctrl+B to enter extended boot menu...
BootWare password: Not required. Please press Enter to continue.

Password recovery capability is enabled.
Note: The current operating device is flash
Enter < Storage Device Operation > to select device.

===========================<EXTEND-BOOTWARE MENU>===========================
|<1> Boot System |
|<2> Enter Serial SubMenu |
|<3> Enter Ethernet SubMenu |
|<4> File Control |
|<5> Restore to Factory Default Configuration |
|<6> Skip Current System Configuration |
|<7> BootWare Operation Menu |
|<8> Clear Super Password |
|<9> Storage Device Operation |
|<0> Reboot |
============================================================================
Ctrl+C: Display Copyright
Ctrl+F: Format File System
Enter your choice(0-9): 4

===============================<File CONTROL>===============================
|Note:the operating device is flash |
|<1> Display All File(s) |
|<2> Set Application File type |
|<3> Delete File |
|<0> Exit To Main Menu |
============================================================================
Enter your choice(0-3): 1

Display all file(s) in flash:
'M' = MAIN 'B' = BACKUP 'S' = SECURE 'N/A' = NOT ASSIGNED
============================================================================
|NO. Size(B) Time Type Name |
============================================================================

===============================<File CONTROL>===============================
|Note:the operating device is flash |
|<1> Display All File(s) |
|<2> Set Application File type |
|<3> Delete File |
|<0> Exit To Main Menu |
============================================================================
Enter your choice(0-3): 0

===========================<EXTEND-BOOTWARE MENU>===========================
|<1> Boot System |
|<2> Enter Serial SubMenu |
|<3> Enter Ethernet SubMenu |
|<4> File Control |
|<5> Restore to Factory Default Configuration |
|<6> Skip Current System Configuration |
|<7> BootWare Operation Menu |
|<8> Clear Super Password |
|<9> Storage Device Operation |
|<0> Reboot |
============================================================================
Ctrl+C: Display Copyright
Ctrl+F: Format File System
Enter your choice(0-9): 5
Password recovery capability is enabled. To perform this operation, first
disable the password recovery capability using the undo password-recovery
enable command in CLI.

===========================<EXTEND-BOOTWARE MENU>===========================
|<1> Boot System |
|<2> Enter Serial SubMenu |
|<3> Enter Ethernet SubMenu |
|<4> File Control |
|<5> Restore to Factory Default Configuration |
|<6> Skip Current System Configuration |
|<7> BootWare Operation Menu |
|<8> Clear Super Password |
|<9> Storage Device Operation |
|<0> Reboot |
============================================================================
Ctrl+C: Display Copyright
Ctrl+F: Format File System
Enter your choice(0-9): 7

=========================<BootWare Operation Menu>==========================
|Note:the operating device is flash |
|<1> Backup Full BootWare |
|<2> Restore Full BootWare |
|<3> Update BootWare By Serial |
|<4> Update BootWare By Ethernet |
|<0> Exit To Main Menu |
============================================================================
Enter your choice(0-4): 3

====================<BOOTWARE OPERATION SERIAL SUB-MENU>====================
|<1> Update Full BootWare |
|<2> Update Extend BootWare |
|<3> Update Basic BootWare |
|<4> Modify Serial Interface Parameter |
|<0> Exit To Main Menu |
============================================================================
Enter your choice(0-4): 4

===============================<BAUDRATE SET>===============================
|Note:'*'indicates the current baudrate |
| Change The HyperTerminal's Baudrate Accordingly |
|---------------------------<Baudrate Available>---------------------------|
|<1> 9600(Default)* |
|<2> 19200 |
|<3> 38400 |
|<4> 57600 |
|<5> 115200 |
|<0> Exit |
============================================================================
Enter your choice(0-5): 0

====================<BOOTWARE OPERATION SERIAL SUB-MENU>====================
|<1> Update Full BootWare |
|<2> Update Extend BootWare |
|<3> Update Basic BootWare |
|<4> Modify Serial Interface Parameter |
|<0> Exit To Main Menu |
============================================================================
Enter your choice(0-4): 0

=========================<BootWare Operation Menu>==========================
|Note:the operating device is flash |
|<1> Backup Full BootWare |
|<2> Restore Full BootWare |
|<3> Update BootWare By Serial |
|<4> Update BootWare By Ethernet |
|<0> Exit To Main Menu |
============================================================================
Enter your choice(0-4): 0

===========================<EXTEND-BOOTWARE MENU>===========================
|<1> Boot System |
|<2> Enter Serial SubMenu |
|<3> Enter Ethernet SubMenu |
|<4> File Control |
|<5> Restore to Factory Default Configuration |
|<6> Skip Current System Configuration |
|<7> BootWare Operation Menu |
|<8> Clear Super Password |
|<9> Storage Device Operation |
|<0> Reboot |
============================================================================
Ctrl+C: Display Copyright
Ctrl+F: Format File System
Enter your choice(0-9): 9

==============================<DEVICE CONTROL>==============================
|<1> Display All Available Nonvolatile Storage Device(s) |
|<2> Set The Operating Device |
|<3> Set The Default Boot Device |
|<0> Exit To Main Menu |
============================================================================
Enter your choice(0-3): 1

Display all available nonvolatile storage device(s):
============================================================================
|NO. Device Name File System Total Size Available Space |
|1 flash YAFFS2 75104256 73924608 |
============================================================================

==============================<DEVICE CONTROL>==============================
|<1> Display All Available Nonvolatile Storage Device(s) |
|<2> Set The Operating Device |
|<3> Set The Default Boot Device |
|<0> Exit To Main Menu |
============================================================================
Enter your choice(0-3):