HPE Community
Comware Wireless / Unified Series
1753528 Members
5136 Online
108795 Solutions
New Discussion

Re: Server08 Radius and 802.1x Setup

 
fillawea
New Member

‎12-28-2009 04:31 PM

‎12-28-2009 04:31 PM

Server08 Radius and 802.1x Setup

We have a WX2200 controller, 3950 APs, and we want to authenticate users with 802.1x. I have created the PEAP certificate and set up NPS. I still have problems. I can make the Web Portal authentication work, but setting up the PEAP/802.1x has been a complete hassle. when the authentication acts like it is working (event viewer) I can't get an IP address. Anyone an expert on this setup?



Thanks!

0 Kudos
1 REPLY 1
jcarlos
Occasional Advisor

‎02-09-2010 05:48 PM

‎02-09-2010 05:48 PM

Re: Server08 Radius and 802.1x Setup

if you are working with 802.11x you should check if every element on the authentication process support the sames protocols or standars: wireless client, wireless controles and Radius Server.



0 Kudos
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.