WX3024 & WA2620 AP Do Not Talk

[Switchinator_1]

The WA2620 does download it's image from the controller.

Image download in progress for AP

Failed to connect to AC for AP testap1

WA2620 is brand new. Probibly not configured correctly.

Do I need special FIT software for this AP to operate in managed mode

using the WX3024 controller? Auto_AP does not appear to work.

Could somebody please post a basic configuration for a WA2620 ?

Here is my WX3024 config and my WA2620 config.

I'm sure I'm missing something simple.

begin WX3024 Config

====================

dis curr


#


 version 5.20, Release 3111P01, Release 3111P01


#


 sysname WX3024


#


 domain default enable system


#


 ip host ns.somedomain.org 10.x.x.x


 ip host ns3.otherdomain.org 10.x.x.x


#


 telnet server enable


#


 portal trap server-down


#


 oap management-ip 192.168.0.101 slot 0


#


 wlan country-code US


#


 wlan auto-ap enable


#


vlan 1


#


domain system


 access-limit disable


 state active


 idle-cut disable


 self-service-url disable


#


user-group system


#


local-user admin


 password cipher G%3Q/UW6aBaQ=^Q`MAF4<1!!


 authorization-attribute level 3


 service-type ssh telnet


#


wlan rrm


 dot11a mandatory-rate 6 12 24


 dot11a supported-rate 9 18 36 48 54


 dot11b mandatory-rate 1 2


 dot11b supported-rate 5.5 11


 dot11g mandatory-rate 1 2 5.5 11


 dot11g supported-rate 6 9 12 18 24 36 48 54


#


wlan radio-policy 257


#


wlan radio-policy 258


#               


wlan service-template 1 clear


 ssid Wireless


 bind WLAN-ESS 0


 service-template enable


#


interface NULL0


#


interface Vlan-interface1


 ip address 10.x.1.18 255.255.128.0


#


interface GigabitEthernet1/0/1


#


interface WLAN-ESS0


 port link-type hybrid


 port hybrid vlan 1 untagged


#


wlan ap testap1 model WA2620-AGN


 description changeme


 serial-id 219801A0AA909CG01373


 radio 1 type dot11a


  radio-policy 257


  service-template 1


 radio 2        


  radio-policy 258


  service-template 1


#


 ip route-static 0.0.0.0 0.0.0.0 Vlan-interface1 10.33.1.1


#


 snmp-agent


 snmp-agent local-engineid 8000002B03002473960050


 snmp-agent community read public


 snmp-agent sys-info contact netadmin@somedomain.org


 snmp-agent sys-info location The Ozone


 snmp-agent sys-info version v2c v3


#


 ssh server enable


 sftp server enable


#


 load xml-configuration


#


user-interface aux 0


user-interface vty 0 4


 authentication-mode scheme


 user privilege level 3


#


return          





=====================

Begin WA2620AGN Config

===============================

dis curr


#


 version 5.20, Beta 1102P01


#


 sysname WA2620-AGN


#


 info-center source LWPC channel 4


#


 telnet server enable


#


 wlan ac ip 10.x.1.18


#


vlan 1


#


interface NULL0


#


interface Vlan-interface1


 ip address 10.x.1.20 255.255.128.0


#


interface GigabitEthernet1/0/1


#


interface WLAN-Radio1/0/1


 description change radio1 description


#


interface WLAN-Radio1/0/2


#


 ip route-static 0.0.0.0 0.0.0.0 10.33.1.1


#


#


user-interface con 0


user-interface vty 0 4


 user privilege level 3


 set authentication password simple h3capadmin


#


return





 

[scotteberg]

I think you need to configure the software version in the controller most likely. Log into the console port of the AP and find out the Software Version by typing DIS WLAN AP.

Take the version and on the controller type the following command replacing the software version with the numbers from your AP.

wlan apdb WA2620-AGN Ver.A V100R001B71D002SP02