Hello All Does anyone have a guide on working out the progress for a FS Consistency check. We had a service set failover which has caused a check to be run. It currently says "FS Consistency Check progress 4295198". It has been running for...
I have a D2D unit using as a NAS to host backup. Using the D2D dedup features the unit was filled up to 90% physical space. I deleted more than 1 TB of data but I don't see any increase in available space. How can I perform housekeeping on the unit i...
Hello, I'm looking for a firmware file with name 'LTT_Ultrium_3-SCSI_Q51D_Standalone.frm'. I'm unable to download the file with HP's 'HPE Library and Tape Tools' because I have no warranty contract (the drive is 8 years old ;-)) and I will not link t...
Hi All, im trying to upgrade my ESL G3 LTO6 firmware to the latest version from J3HW to J5SW. unfortunatly the drive status (as per screenshot) is at autolevel which prevent me from upgrading it. here is the detail. Library: ESL G3 HW revision 2 ( fi...
Currently on HPE StoreOpen Standalone 3.3.0, with a couple HPE LTO Ultrium-8 and Ultrium-6 drives. Although the "LTFS Configuration" GUI utility works fine, I would prefer the command line utility for scripting purposes. This ships with a W...
Hello Alaa, Thank you for choosing HPE. To perform backups to the tape ibrary you would need a software which is aware of tape libraries. Data Protector is one of the several softwares which is aware of Tape Libraries and you can schedule backups bas...
Hello @DA_Carobin , Thank you for the clarification. T here are various factors that are taken into consideration when designing and testing the max performance to name a few ( RAM, processing power etc). For a hardware based appliance the configurat...
New Messages
No New Messages
Hot Topic
Replied-to Topic
Read-Only Topic
