cancel
Showing results for 
Search instead for 
Did you mean: 

Font Size in Dtterm

SOLVED
Go to solution
Rainer Lindenmayer
Occasional Advisor

Font Size in Dtterm

How can i change the Font Size of the Menu Bar in a Dtterm Window on HP-UX 11.00
2 REPLIES
Alex Glennie
Honored Contributor
Solution

Re: Font Size in Dtterm

Easiest way is via CDE's style manager located on the front panel. However this will affect other Xclients too most likely.

You could therefore create a dtterm specific resource in say $HOME/.Xdefaults

eg dtterm* : font

I'm not sure the exact font_resource but its most likely one of :
*labelFontList,*systemFont,*textFontList,*userFont

..... basically I'd run xrdb -q and see the specific fonts and how these change when you you use the style manager eg from small to medium, large to xxl etc ....

since the menu font size changes using this method it would seem logical its one of the font resources listed in the xrdb -q output ?
Wodisch
Honored Contributor

Re: Font Size in Dtterm

Hello Rainer,

the resourc should be "dtterm*userFont: 12x24" or
whatever font you want...

Read the PDF I wrote about it, to get the details at
http://www.ctc.de/kunden00.htm

It is in german, but that should not be a problem for
you, should it? :-)

HTH,
Wodisch