Get/Set Community Name

[Bill Ogle]

How do i find out my GET/SET community names for installing printers?

[Vladislav Demidov]

Try to print Network configuration using buit in printer menu.

[Tim Malnati · Accepted solution]

Telnet to a known JetDirect printer on your network. After you establish contact type '/' to display it's configuration. Typically, it is not set unless you have some Novell in your network where the typical snmp community name is 'public'. Hope this helps.

[Vladislav Demidov]

If you don't have telnet access to your printer reset all conficuration then login to printer and configure it from scratch