cancel
Showing results for 
Search instead for 
Did you mean: 

HSC 1000BASE SX LAN ADAPTER

SOLVED
Go to solution
David Goza
Occasional Advisor

HSC 1000BASE SX LAN ADAPTER

We are trying to install an A4924A NIC in our K450 box. We are using HPUX 11.0. The system claims it but that is about as far as I can go. We have installed all the very latest patches and card drivers. We have tried different cards with the same results. Anybody got any magic tricks?? Will this card work in a K450???
1 REPLY
Stefan Farrelly
Honored Contributor
Solution

Re: HSC 1000BASE SX LAN ADAPTER

Yes, it is supported on a K class.

ours look like this from ioscan -fknClan

lan 1 8/4/1/0 gelan CLAIMED INTERFACE HP A4924A HSC 1000Base-SX Adapter
/dev/gelan1

(driver is gelan). Software is;
J1642AA B.10.20.11 HP PCI/HSC Gigabit Ethernet Driver

and the config file is;
/etc/rc.config.d/hpgelanconf

They dont run at full speed though, the bus on the K is too slow.
Im from Palmerston North, New Zealand, but somehow ended up in London...