Operating System - HP-UX
1748265 Members
4212 Online
108760 Solutions
New Discussion юеВ

Re: Hanging Oracle Listener w/HPUX 11

 
John Felgendreger
Occasional Contributor

Hanging Oracle Listener w/HPUX 11

Has anyone experienced a hanging Oracle Listener in Oracle 7.3.4 and HPUX 11.0? We just upgraded to HPUX 11 from 10.2 and now seem to have periodic service blocks that then hang the listener. We never experienced this problem under HPUX 10.2

Our work around has been to reload the listener every 20 minutes. While this works, it has not solved the underlying problem.

Any Ideas?

6 REPLIES 6
Alex Glennie
Honored Contributor

Re: Hanging Oracle Listener w/HPUX 11

sounds like it maybe the sort of problem that could patchable ?

Have you checked the
- listener.log
- listener.ora, tnsnames.ora
- alert.log
- syslog.log

for clues ?
Joseph C. Denman
Honored Contributor

Re: Hanging Oracle Listener w/HPUX 11

I am running 7.3.4.5 for hpux 11.0. Having no problems with listener.

...jcd...
If I had only read the instructions first??
Tim Medford
Valued Contributor

Re: Hanging Oracle Listener w/HPUX 11

John - Did you re-install or at least re-link Oracle after you upgraded HPUX? You need to do this, otherwise you've got HPUX 10.2 libraries linked into Oracle, running under HPUX 11.0. This may cause unpredictable results.

Tim
Steven Sim Kok Leong
Honored Contributor

Re: Hanging Oracle Listener w/HPUX 11

Hi,

If the listener.log is not sufficient for interpretation, you can try enabling listener trace. However, please bear in mind that listener trace files can be huge. But it is definitely collects more information that the standard listener.log in aiding troubleshooting.

Hope this helps. Regards.

Steven Sim Kok Leong
Brainbench MVP for Unix Admin
http://www.brainbench.com
Sree_2
New Member

Re: Hanging Oracle Listener w/HPUX 11

Make sure the parameter
USE_PLUG_AND_PLAY_LISTENER=ON is commented out in the listener.ora file.

This could cause serious hangups
Wodisch
Honored Contributor

Re: Hanging Oracle Listener w/HPUX 11

Hello John,
just some time back (when HP-UX 11 came out) I tried
"upgrading" to 11.00 and keeping Oracle 7.3.4 (but
for HP-UX 10) and was "runnable" - except for the
listener! You need to install Oracle 7.3.4 fore HP-UX 11!!!
HTH,
Wodisch