How to find system info

[Vinod Subramanian]

Could you tell me the command to find information about a systems OS-version, patchlevel, hardware (Number of cpu's, speed, any specification for the CPU, memory size)
Does a single command provide all the information or multiple commands.

[David_246]

Hhhm,

If you use CDE export your display and use "xstm"
It will give you all.

Regs David

[Martin Johnson]

You can get some of the information from glance, if you have it. Patches can be listed with "swlist -product".

HTH
Marty

[Pete Randall]

If you have Ignite installed, the print_manifest command can provide much of this info in one source. Otherwise, you can patch together several commands in a script to give you what you want.

OS-version - uname -r
patchlevel - swlist
Number of cpu's - ioscan -k |grep -n processor |wc -l
speed -
HPUX=/stand/vmunix

MHZ=$(echo itick_per_tick/D | adb -k $HPUX /dev/kmem | tail -1 | awk '{print $2/10000}')
echo $MHZ

memory size -
HPUX=/stand/vmunix
MAJORREV=$(uname -r | cut -f2 -d .)
if [ $MAJORREV -ge "11.0" ]
then
MYSYMBOL="phys_mem_pages"
else
MYSYMBOL="physmem"
fi

MYMEM=$(echo "${MYSYMBOL}/D" | adb $HPUX /dev/kmem | grep "${MYSYMBOL}: *." | awk '{printf "%.0f MB\n",$2/256}')
echo $MYMEM



All those commands combined in a script can tell you everything you need to know.


Pete

[James Murtagh]

Hi Vinod,

OS Version:

# uname -r

Patch level:

# swlist -l product
# swlist -l bundle

(see man swlist for a full description)

Hardware:

# ioscan -fn
# ioscan -fnCprocessor|grep -c proc (number of CPUs)

Memory:

# echo phys_mem_pages/D|adb -k /stand/vmunix /dev/kmem

This is the number of 4096 byte pages

Processor speed:

echo itick_per_tick/D|adb -k /stand/vmunix /dev/kmem

These commands all assume you are on release >= 11.00.

Regards,

James.

[Pete Randall]

That last didn't read very well - let's try this:

If you have Ignite installed, the print_manifest command can provide much of this info in one source. Otherwise, you can patch together several commands in a script to give you what you want.

++++++++++++++++++++++++++++++
OS-version - uname -r
++++++++++++++++++++++++++++++
patchlevel - swlist
++++++++++++++++++++++++++++++
Number of cpu's - ioscan -k |grep -n processor |wc -l
++++++++++++++++++++++++++++++
speed -
HPUX=/stand/vmunix

MHZ=$(echo itick_per_tick/D | adb -k $HPUX /dev/kmem | tail -1 | awk '{print $2/10000}')
echo $MHZ
++++++++++++++++++++++++++++++
memory size -
HPUX=/stand/vmunix
MAJORREV=$(uname -r | cut -f2 -d .)
if [ $MAJORREV -ge "11.0" ]
then
MYSYMBOL="phys_mem_pages"
else
MYSYMBOL="physmem"
fi

MYMEM=$(echo "${MYSYMBOL}/D" | adb $HPUX /dev/kmem | grep "${MYSYMBOL}: *." | awk '{printf "%.0f MB\n",$2/256}')
echo $MYMEM
++++++++++++++++++++++++++++++


All those commands combined in a script can tell you everything you need to know.


Pete

[Stan_17]

Hi vinod,

system OS-version : uname -a

patchlevel : swlist (should give you a list of patch bundles been applied)

memory size : dmesg (should tell you the physical ram size in the system)

i'm sure others would pitch in with their suggestions.

hth,
Stan

[Paul Sperry]

SAM
Preformance Monitors
System Properties

And

The swlist command
man swlist

[James R. Ferguson]

Hi:

Do this for your protection: make routine Ignite recovery tapes:

# /opt/ignite/bin/make_tape_recovery -x inc_entire=vg00 -I -v -a /dev/rmt/0mn

*Now*, having done that, for *free* you have a manifest with much of the information you are seeking in:

# /var/opt/ignite/recovery/latest/manifest

Regards!

...JRF...