Databases
cancel
Showing results for 
Search instead for 
Did you mean: 

Install Oracle 10g RAC ( CRS ) HPUX

Nabil_11
Frequent Advisor

Install Oracle 10g RAC ( CRS ) HPUX

Hi All,
I need to install oracle10g on HPUX with MC/serviceGuard Ext. for RAC.
with the following configuration:
I configure MC/serviceGuard and create cluster
from the two nodes db1 db2,
then I create two packeges instance1 instance2 each package run only on one member
instance1 run on db1, instance2 run on db2
also I prepare shared raw devices
I create vg_rac thats include all the database files and this vg also contains the OCR registry and votes shared raw device
I have in /etc/hosts
172.16.1.1 db1 db1.ssc.gov.jo ( public IP)
10.10.10.1 heartdb1
172.16.1.10 vdb1 ( instance1 )
172.16.1.2 db2 db2.ssc.gov.jo ( public IP )
10.10.10.2 heartdb2
172.16.1.20 vdb2 ( instance2 )
vdb1 and vdb2 IP Address userd by the MC/serviceGuard packages instance1 and instance2.
I strart my cluster it run without errors also my packages run with no errors.
I try to install Oracle CRS while the cluster and packages running but at the end it gives me error on VIP
I need to know if my configuratin as HPUX cluster and packages correct or not,
also which VIP ( Vertual IP )I should use
the IP generated by instance1 and instance2 packages or IP address that CRS will create


Regards

Please Advice
5 REPLIES
Ranjith_5
Honored Contributor

Re: Install Oracle 10g RAC ( CRS ) HPUX

Hi,

Attached the doc for 9.2.0.1 RAC. procdure must not be different for 10g.

Regards,
Syam
Ranjith_5
Honored Contributor

Re: Install Oracle 10g RAC ( CRS ) HPUX

Hi,

Just go through the following thread as well.

http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=964486

Regards,
Syam

Re: Install Oracle 10g RAC ( CRS ) HPUX

HI read the doc
Best Rgs
Alex
Nabil_11
Frequent Advisor

Re: Install Oracle 10g RAC ( CRS ) HPUX

Thanks for all,

BUT I need to know if I should create packages
to release the IP address or I should let CRS release these IP's

I successfully Install CRS and Oracle Database
but without MC/ServiceGuard Packages
Just The Cluster running.
I dont know if this scenario correct or NOT

Also I have another two RP servers I need to install Oracle Internet Application Server.
on same environment MC/ServiceGuard Ext. For RAC

Please Advice.



Nabil_11
Frequent Advisor

Re: Install Oracle 10g RAC ( CRS ) HPUX

10x for all
I have alot of CRS Installation Documantation
Till now I didnt have clear answer about using
the IP addresses generated by the MC/ServiceGuard packages or oracle CRS Services

Regards

Nabil