Operating System - HP-UX
1752794 Members
6001 Online
108789 Solutions
New Discussion юеВ

Re: Mounting Prob in HP UX

 
SOLVED
Go to solution
senthil_3
Frequent Advisor

Mounting Prob in HP UX

Hi,

I am mounting a CD in HPUX, when accessing or listing the files , it gives all the FILES in CAPs Format, but the same CD is getting Well accessed through Solaris and AIX, With Case sensistivity.

Please help me over this
tnx
14 REPLIES 14
harry d brown jr
Honored Contributor

Re: Mounting Prob in HP UX

What kind of CD is it and what was the command you used to mount the CD? What OS are you running and what is your latest patch level?

live free or die
harry
Live Free or Die
Jean-Luc Oudart
Honored Contributor

Re: Mounting Prob in HP UX

Have you seacrhed the forum for this type of request ?

check the following :
http://forums.itrc.hp.com/cm/QuestionAnswer/1,,0x39cb0bce6f33d6118fff0090279cd0f9,00.html

Jean-Luc
fiat lux
harry d brown jr
Honored Contributor

Re: Mounting Prob in HP UX

Bill has an explanation here:

http://hpux.cs.utah.edu/hppd/FAQ/9-20.html

live free or die
harry
Live Free or Die
Keely Jackson
Trusted Contributor

Re: Mounting Prob in HP UX

Hi

Try mounting with the -o cdcase option

eg mount -o cdcase /dev/dsk/c1t2d3 /cdrom

Cheers
Keely
Live long and prosper
senthil_3
Frequent Advisor

Re: Mounting Prob in HP UX

Hi,

Now I am able see the cases in normal format..but the file names are truncated, which is not happening in Solaris and AIX with same CD.

Please help
KapilRaj
Honored Contributor

Re: Mounting Prob in HP UX

hi,
pl. post the ls -l o/p, would be fine to diag

kaps
Nothing is impossible
Jeff Schussele
Honored Contributor

Re: Mounting Prob in HP UX

Hi Senthil,

I thought I responded to this earlier, but now I don't see it.....anyway
You need to designate the FS type in the command as follows:

mount -F cdfs -o cdcase /dev/dsk/cxtydz /cdrom

See if that gets it for you.

HTH,
Jeff
PERSEVERANCE -- Remember, whatever does not kill you only makes you stronger!
Jeff Schussele
Honored Contributor

Re: Mounting Prob in HP UX

I knew I did...see your other post

http://forums.itrc.hp.com/cm/QuestionAnswer/1,,0x03f056bd90a9d611abdb0090277a778c,00.html

Jeff
PERSEVERANCE -- Remember, whatever does not kill you only makes you stronger!
Sanjay_6
Honored Contributor

Re: Mounting Prob in HP UX

Hi Senthil,

Have you tried the cdcase option,

mount -o cdcase /dev/dsk/cxtydz /cdrom

Hope this helps.

Regds