cancel
Showing results for 
Search instead for 
Did you mean: 

Netstation Software

SOLVED
Go to solution
David_15
Occasional Visitor

Netstation Software

Not sure how to install netstation software (for a HP Envizex terminal) on a 10.20 HP-UX B180L
Any help with installing Netstation software for a HP-UX 10.20
2 REPLIES
Alex Glennie
Honored Contributor
Solution

Re: Netstation Software

If its not the newer Envizex II model then you need to install enware version 7.11 or before, onto any unix host.

The s/w comes in a range of flavours aix,hpux,solaris etc.

For HPUX it's normally a .img file which swinstall is compatible with :

So to install just run swinstall pointing at the hp10.img file be it on CD-ROM or other.

If it's a newer Entria or Envizex II model then the same is true but it's enware2 aka netstation 9.11.

Other points to note :

The enware S/W ships on the applications CD's and is password protected/purchaseable

For HPUX 11.xx there are separate versions of both 7.11 and 9.11 for 11.xx use ONLY

To add bootp entries / config xterminal on server use SAM or run xtadm from the command line.

David_15
Occasional Visitor

Re: Netstation Software

Thanks for your help Alex I will give it a try

Regards
David
Any help with installing Netstation software for a HP-UX 10.20