Operating System - HP-UX
1752794 Members
6114 Online
108789 Solutions
New Discussion юеВ

Re: Oracle9.0.1 on hpux11.0 installation?

 
SOLVED
Go to solution
shi_2
Advisor

Re: Oracle9.0.1 on hpux11.0 installation?

Hi,

After remount the CD with the following commmand: /usr/sbin/pfs_mount /SD_CDROM,
the result is the same:
a500-1:/SD_CDROM 0 0 0 0% /SD_CDROM

total 20
drwxrwxr-x 2 25882 502 2048 Jun 5 2001 doc
-rwxrwxr-x 1 25882 502 5921 Jun 2 2001 index.htm
drwxr-xr-x 2 25882 502 2048 May 24 2001 install
drwxr-xr-x 2 25882 502 2048 May 7 2001 lsm
drwxrwxr-x 2 25882 502 2048 Jun 1 2001 oidupgrade
drwxr-xr-x 2 25882 502 2048 May 30 2001 response
-rwxr-xr-x 1 25882 502 651 Mar 14 2001 runInstaller
drwxr-xr-x 2 25882 502 2048 Jun 1 2001 stage

Then I stated the ./runInstaller scipt, this time, the jave GUI can started normally. Now I followed the structions, when doing the 17%, the installation paused with the following message:

Error in writing to file /opt/oracle/oui/ewt.jar...

From the help of topic windows, it seems the disk space related problem, but I checked the disk space, there are enough sapce left...how can I do now?

Thanks a lot!

shi_2
Advisor

Re: Oracle9.0.1 on hpux11.0 installation?

Now I met a new problem. Following is the detail information:

During the installtion, the systen wanted me to insert the #2 CD to the driver. I pushed the button of the driver and try to get out the #1 CD, but I can not. So I check the system, I found the following:
a500-1:/SD_CDROM 0 0 0 0% /SD_CDROM

I try to use the pfs_umount /SD_CDROM to umount the #1 CD, but the following message was displayed:
# pwd
/
# pfs_umount /SD_CDROM
umount: /SD_CDROM: Device busy
#

How can I do now? Thanks a lot!

Indira Aramandla
Honored Contributor

Re: Oracle9.0.1 on hpux11.0 installation?

Hi Shi,

I would recommend you exit the installation and clean up the logs and files.

Mount the CD's all three of them one after the other, copy the contents on to a file system and then install form there. During the installation, when it propmts for the disk-2, disk-3 files location you can specify the directory.


Indira A.
Never give up, Keep Trying
shi_2
Advisor

Re: Oracle9.0.1 on hpux11.0 installation?

Hi Indira Aramandla,

The media change related problem had been solved. I use the following command:
fuser -ku /SD_CDROM

Then, pfs_umount /SD_CDROM, insert the #2,
pfs_mount /SD_CDROM, now the installtion is
going on...

Thanks for your answering letter...Nice day and happy new year..
shi_2
Advisor

Re: Oracle9.0.1 on hpux11.0 installation?

Hi Everybody,

Firstly, thank you for your concern and great help. With your help, I made a big progress in installing although I still met
some new problem.

Secondly, I still need your help in the future.

Finally, at the end of yeay, I will give my best wishes to you: Happy New Year...


Thanks a lot!

Mobeen_1
Esteemed Contributor

Re: Oracle9.0.1 on hpux11.0 installation?

Shi,
If you have adequate free space on a file system, i would always recommend that you copy the contents of the CD-ROM there and install it from the filesystem. It will generally be faster and you would not have to go through much of this :-)

Take care

Bye for now

rgds
Mobeen