cancel
Showing results for 
Search instead for 
Did you mean: 

Print UNIX to NT

SOLVED
Go to solution

Print UNIX to NT

Hi,

how can i do to print UNIX files to printer in Windows2000
Interest HP-UX
11 REPLIES
D. Jackson_1
Honored Contributor

Re: Print UNIX to NT

You will need to set the printer up as a remote printer on the HPUX side.
SAM will help you do this..

You will need a queue name from the HP side and you will need to know what the IP is of the 2000 server and the printer name connected to it.

Good Luck
Arockia Jegan
Trusted Contributor

Re: Print UNIX to NT


Hi,

You can do it through sam. Run sam,

Printers and plotters----> LP spooler----> printers and plotters---->
Actions---> Add remote printer

PIYUSH D. PATEL
Honored Contributor

Re: Print UNIX to NT

Hi,

You can setup a remote printer thro SAM and you should know the IPaddress and printer name on the NT server.

Piyush
MANOJ SRIVASTAVA
Honored Contributor

Re: Print UNIX to NT

Hi


There are many ways to do it :

1. Set up the printer as remote printer using SAM.

2. Ftp files to the PC and then print them after importing them as a document file or excell sheet.

3, You can send the file as an attachemnt to the mail and them open it and print it .


Manoj Srivastava

Re: Print UNIX to NT

Yes, it's OK to SAM, but i put my IP adress and tne printer name HP but i havn't
my print.
I think to param a LPD in NT
It is exact but i don't know to do.

Thanks
Interest HP-UX
Sandip Ghosh
Honored Contributor
Solution

Re: Print UNIX to NT

Follow the following Link. I have given details how to configure a remote printer.

http://forums.itrc.hp.com/cm/QuestionAnswer/1,,0xa7e9ff77de2bd611abd50090277a778c,00.html

Sandip
Good Luck!!!
Stefan Schulz
Honored Contributor

Re: Print UNIX to NT

Hi,

pretty easy. First install the LPD Services on NT. These are part of the TCP/IP utilities.

Then simply configure a remote printer in HP-UX.

The Onlinehelp of Windows has detailed information. Search for lpq or lpd.

Hope this helps

Regards Stefan
No Mouse found. System halted. Press Mousebutton to continue.

Re: Print UNIX to NT

Thanks a lot for this all informations.
It's OK

Excuse for my english (I'm french)
Interest HP-UX
Sanjay_6
Honored Contributor

Re: Print UNIX to NT

Hi,

This link tells you how to configure a printer connected to a NT server as a remote printer on hp-ux. once you follow the same steps on your win2k system, you should be able to configure the printer.

http://support2.itrc.hp.com/service/cki/docDisplay.do?docLocale=en_US&docId=200000041602968

The doc id is A4793171

Hope this helps.

Regds
Bruno Dostie
Advisor

Re: Print UNIX to NT

Jerome,

On Nt side, when you define your lpdqueue, uses lowercases only. I was not able to print, I just remove queue on WIN2K, and redefine it using lowercase, and it works.

Bye

Bruno
DOSB
twang
Honored Contributor

Re: Print UNIX to NT

Hi,

On NT,
1.
- tcp/ip installed
- "microsoft tcp/ip printing" service installed
- tcp/ip print service set to auto-start
2.use rededt32:
- move to HKEY_LOCAL_MACHINE\SYSTEM\CUrrentControlSet\Service\LPDSVC\Parameters
- Edit|New - DWORD value
- names SimulatePassThroug
- values 1

On UNIX box:
- add a remote printer (use sam if hpux)

hope this hope!!

tommy