cancel
Showing results for 
Search instead for 
Did you mean: 

creating raw device files

Sajjad Sahir
Honored Contributor

creating raw device files

I have to create two raw device files under the volume group /dev/vgora
that is /dev/vgora/raw1
/dev/vgora/raw2
/dev/vgora/raw2 space is already in /dev/vgora
volume group.
volume group status is available shared server
on one node(eg:hp_a)
volume group status is avaialable shared client
on the second node(hP_b)
my first server name is hp_a and second one is hp_b
4 packages are running 2 packages in hp_a(nfs1, orapkg2) and two pacakges in hp_b(nfs2, orapkg2) i am using oracle 9i and hp-ux 11i

what are the steps I have to follow two create
two raw device files on both noded what I mentioned above.

I mean
database shutdown
service guard shutdown etc...
3 REPLIES
Torsten.
Acclaimed Contributor

Re: creating raw device files

I'm really not sure if I understand your question, but if you create a LVOL in your VG vgora (let's say it is called "raw2") you will get a "raw" device called "rraw2".

see
man lvcreate

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Tim Nelson
Honored Contributor

Re: creating raw device files

and I would label that as a raw logical volume vs a raw device with no LVM contructs like /dev/[r]dsk/cxdxtx
Sajjad Sahir
Honored Contributor

Re: creating raw device files

I started new thread