HPE Community
Operating System - HP-UX
1752679 Members
5421 Online
108789 Solutions
New Discussion юеВ

hp-ux from 11.21 to 11.31

 
Goriik
Advisor

тАО04-16-2010 04:50 AM

тАО04-16-2010 04:50 AM

hp-ux from 11.21 to 11.31

Who had the experience? How best to do this? What are the nuances of the need to consider? Servers in a cluster Subway Service Guard.
0 Kudos
Reply
5 REPLIES 5
Torsten.
Acclaimed Contributor

тАО04-16-2010 04:57 AM

тАО04-16-2010 04:57 AM

Re: hp-ux from 11.21 to 11.31

Really 11.21? Obsolete since years! Consider a cold install.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
0 Kudos
Reply
Torsten.
Acclaimed Contributor

тАО04-16-2010 04:59 AM

тАО04-16-2010 04:59 AM

Re: hp-ux from 11.21 to 11.31

Forgot to say - check if your servers are really supported with 11.31 (what model is it?)!

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
0 Kudos
Reply
Pete Randall
Outstanding Contributor

тАО04-16-2010 05:10 AM

тАО04-16-2010 05:10 AM

Re: hp-ux from 11.21 to 11.31

Perhaps you meant 11.23? check with "uname -r". From 11.23 you would at least have the choice of trying to upgrade to 11.31, rather than having to do a cold install. Once again, as Torsten points out, it all depends on your server model.


Pete

Pete
0 Kudos
Reply
Goriik
Advisor

тАО04-16-2010 05:14 AM

тАО04-16-2010 05:14 AM

Re: hp-ux from 11.21 to 11.31

Sorry, version 11.23. Server HP rx7640
0 Kudos
Reply
Steven E. Protter
Exalted Contributor

тАО04-16-2010 06:09 AM

тАО04-16-2010 06:09 AM

Re: hp-ux from 11.21 to 11.31

Shalom,

Big difference.

Yes upgrade is possible and supported.

Still not recommended.

upgrade-ux sucks. (Should really be windows software)

It fails more than half the time I tried it in the lab before I gave it up.

Cold install, followed by application re-install is recommended.

SEP
Steven E Protter
Owner of ISN Corporation
http://isnamerica.com
http://hpuxconsulting.com
Sponsor: http://hpux.ws
Twitter: http://twitter.com/hpuxlinux
Founder http://newdatacloud.com
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.