cancel
Showing results for 
Search instead for 
Did you mean: 

lan install is not working

prasathc
Frequent Advisor

lan install is not working

Hi all

When i try " sea lan install " in " C " class machine during OS installation it is telling error message like
" No devices found "

what could be the problme, and how to handle the situation , can you please guide me

thanks in advance

4 REPLIES
A. Clay Stephenson
Acclaimed Contributor

Re: lan install is not working

Hi,

Make sure that you are using the built-in ethernet port and that it has not been disabled at the boot console level.

Hope this helps, Clay
If it ain't broke, I can fix that.
Shahul
Esteemed Contributor

Re: lan install is not working

Hi

First U make sure that ur ethernet port is OK. Remove network cable and insert once again, Or connect the same cable in some other workstation and confirm that Hardware side is OK.

Then ...Do U have an Ignite Unix server in same subnet? If yes, Make sure that free IP address is available for assigning to clients. Then do search once again, Type like this

search lan install

If it is not finding, search 3 to 4 times..U will succeed. If U have only one Ignite server in subnet U can directly type

boot lan install

Best of luck

Shahul
Vincenzo Restuccia
Honored Contributor

Re: lan install is not working

ioscan -nfClan in output is all claimed?
Bill McNAMARA_1
Honored Contributor

Re: lan install is not working

From a copy of your ioscan map the lan i/face back to the H/W/PATH
then down in th BCH, as usual:

SEA H/W/PATH
where H/W/PATH is the hardware path of your lan if.

Try booting directly from the hw path and noting the error/led indicators on the nic.

BO H/W/PATH

It works for me (tm)