1748060 Members
5287 Online
108758 Solutions
New Discussion юеВ

Re: memory float 7500

 
Mariusz Grabowski_2
Frequent Advisor

memory float 7500

Hi,
I have a problem with my k580 server. It's working with 1 processor, but it does not stand up - it stands on error "memory float 7500" and that's all. even reset won't help.

regards,
Mariusz Grabowski
3 REPLIES 3
melvyn burnard
Honored Contributor

Re: memory float 7500

I guess what you are trying to say is:
Memory Fault 7500
and the system will not boot?

If so, you have a hardware failure and will need to fix it, probably memory .
I recommend you contact your local hardware support office.
My house is the bank's, my money the wife's, But my opinions belong to me, not HP!
Andreas Voss
Honored Contributor

Re: memory float 7500

Hi,

if the 7500 is on the LCD display then that means: No RAM found !
Check your memory at ISL mode and run offline diagnostics (if you have installed): ode

Regards

Andrew
Patrick Wessel
Honored Contributor

Re: memory float 7500

FLT 7500 is the chassis code for no memory found. Did you move your server before you received this error? In that case you can try to reseat the memory carrier. It helps in more than 50%?
There is no good troubleshooting with bad data