Storage Boards Cleanup
To make it easier to find information about HPE Storage products and solutions, we are doing spring cleaning. This includes consolidation of some older boards, and a simpler structure that more accurately reflects how people use HPE Storage.
Disk Arrays
cancel
Showing results for 
Search instead for 
Did you mean: 

12H Auto Raid

SOLVED
Go to solution
Nobody's Hero
Valued Contributor

12H Auto Raid

I have an HP 12H auto raid box with a failed drive. Fail over or redundancy protection worked fine. However, I am going to replace this drive that is bad. Can I just shutdown oracle so nothing is accessing the auto raid and then just swap the drive? Physically?
UNIX IS GOOD
6 REPLIES
Pete Randall
Outstanding Contributor
Solution

Re: 12H Auto Raid

Robert,

You might want to shut down Oracle to be on the safe side, but the drives are supposed to be hot swappable. You've already said it's switched over to the other drive. You should be able to just pull the failed one and pop in its replacement.

Pete

Pete
Helen French
Honored Contributor

Re: 12H Auto Raid

Hi Robert:

The drives are hot-swappable ! You don't need to shutdown anything. Just remove and install the new drive. The AUTORAID array will take care about everything else.

HTH,
Shiju
Life is a promise, fulfill it!
A. Clay Stephenson
Acclaimed Contributor

Re: 12H Auto Raid

Hi:

The main reason for having one of these things is so that you don't have to shutdown at all. Simply remove your bad drive module and replace it with the new module and walk away.
There will be a light show for up to 2 or 3 hours whiule the array re-balances but business can continue as usual during this period.
If it ain't broke, I can fix that.
S.K. Chan
Honored Contributor

Re: 12H Auto Raid

Replace the drive "hot", there is no need for shutdown. You can check the status of the rebuild using "arraydsp" command.
Bill McNAMARA_1
Honored Contributor

Re: 12H Auto Raid

As the others are saying, you can remove the failed drive no problem... hot.

You can also place the replacement drive hot.

Configuration of the 12H that would affect the operation would be AutoRebuild functionality on or off.. and the rebuild priority may be high or low
AutoInclude may be on or off

Verify with arraydsp -a
where SN is the serial number returned from arraydsp -i

If AutoInclude is Off
The inserted disk will not be automatically included.
You will have to manually include via the disk changes option.

If AutoRebuild is off, you will have to rebuild manually.

If the rebuild priority is low, the rebuild will take longer, as the io to the array will get spindle priority over a rebuild operation.

You may prefer to do this during quieter period to avoid a higher hit on your application, in terms of performance, although, apart from that your application should not even know that a disk has failed or that data is rebuilding or migrating on the array.

If you plan to stop oracle, do a backup before rebuilding... just in case the rebuild fails... which it shouldn't !

Later,
Bill
It works for me (tm)
Sanjay_6
Honored Contributor

Re: 12H Auto Raid

Hi Robert,

With an autoraid, you don't have to shutdown the disk drive subsystem to replace the failed drive. you can do it online itself.

Check the disk array manual for more info on how to replace a failed drive.

http://h200004.www2.hp.com/bc/docs/support/SupportManual/lpg28364/lpg28364.pdf

Hope this helps.

Regds