cancel
Showing results for 
Search instead for 
Did you mean: 

12H Autoraid

SOLVED
Go to solution
Nobody's Hero
Valued Contributor

12H Autoraid

If I have a 12H autoraid, and I binf all free space to lun zero and create one large filesystem. Do I still need to define a hot spare? I thought the 12H does all that spare config on its own.
UNIX IS GOOD
2 REPLIES
A. Clay Stephenson
Acclaimed Contributor
Solution

Re: 12H Autoraid

You don't assign a disk as a dedicated hot spare. You either enable (-h on) or disable (-h off) active spare via with arraymgr command. With active spare enabled, the amount of free space is decreased but the array then has enough space to automatically rebuild after a failed disk. With active spare disabled, no data will be lost because the redundancy still accounts for all the data bits but if another disk should fail before you replace the first failed disk then data will be lost.

Man arraymgr for details. I can tell you that assigning every bit of the available free space as LUN's has a very significant negative performance impact for these old gals.
If it ain't broke, I can fix that.
Torsten.
Acclaimed Contributor

Re: 12H Autoraid

If you are allocating all the space to a LUN, the performance will be poor and your autoraid is a raid5 array only.

see this thread for performance tuning

http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=140045

(around 50% for LUN usage, multiple LUNs, filesystem striping via different hw-pathes)

or search for "autoraid performance".

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!