Storage Boards Cleanup
To make it easier to find information about HPE Storage products and solutions, we are doing spring cleaning. This includes consolidation of some older boards, and a simpler structure that more accurately reflects how people use HPE Storage.
Disk Arrays
cancel
Showing results for 
Search instead for 
Did you mean: 

3200 array controller on proliant ml350 and warning message

Oskar Teran
Frequent Advisor

3200 array controller on proliant ml350 and warning message

hello,
I'm trying to install SCO 5.0.5 on proliant ML350 with a 3200 array controller.
I found the SCO document specifying to use the BTLD disks to load the driver for the 3200 array controller. I follow those steps, but after the driver loads successfully, I see a warning:

Test open failed "hd=Sdsk", no root disk controller.
System configuration has not been run on this controller, use system configuration to assign order of this controller.

I have the smartstart 5.5 disk and I've used it to prepare the server. I don't see any tools on it to run the system configuration. I've installed Proliant 800/1600's and they have the system config. available when you press F10 during bootup. I press F10 on this server and I don't get a menu where system config. is available.
So....how can I get past this hurdle?

Thanks,

Oskar
1 REPLY
Oskar Teran
Frequent Advisor

Re: 3200 array controller on proliant ml350 and warning message

he complete warning message is as follows:
Warning: ida: the order of the controller in slot 6 is unassigned - using ida0

Then follows the message saying system config. has not been run.

I've tried messing around with the bootstrings but still no luck...