cancel
Showing results for 
Search instead for 
Did you mean: 

3si in a LH3

Craig Carl
Occasional Visitor

3si in a LH3

I have a Netraid 3si card in a LH3 with 1 drive cage populated w/6 drives. I configured the RAID array, initialized the drives and formated. I rebooted to the Windows CD, installed Server 2000 on the new RAID array and rebooted. I now get the error 'Couldn't open boot partition to read signature' and then the box boots to the CD again. I have confirmed that the drive array is attached to the 3si card. Any suggestions? Thanks
1 REPLY
Marco Hogeveen
Honored Contributor

Re: 3si in a LH3

Craig,

Try disabling the onboard netraid in the setup.
Take a look at the netserver w2k installation guide for hints&tips: http://netserver.hp.com/docs/download.asp?file=it_win2k_0601.pdf
Use the LH3 driver diskette for W2K: http://www.hp.com/cposupport/servers/software/lh3drvw2k.exe.html
Which BIOS does the LH3 has? download the latest at: http://www.hp.com/cgi-bin/cposupport/swindex.pl?p=hpnetserve6717&l=en&c=BIOS

Hope this helps.

Marco.