Disk Enclosures
1748061 Members
5333 Online
108758 Solutions
New Discussion юеВ

642 controller with msa30 drive cage

 
Steve_597
Occasional Advisor

642 controller with msa30 drive cage

Hello,

I have a dl580 with the above controller and cage. One RAID5 drive failed in cage and I replaced but it won't rebuild automatically.
It is in "interim recovery mode" and I can't figure out how to make it recover.
Can anyone help?

Thanks
2 REPLIES 2
YoungHwan, Ko
Valued Contributor

Re: 642 controller with msa30 drive cage

Hi.
MSA30 already configured RAID5 with 642 Array controller, and failed 1 disk, you have no business without disk replacing.
It will be recover automatically.
Regards!
Steven Clementi
Honored Contributor

Re: 642 controller with msa30 drive cage

Steve:

Did you configm that the controler "see's" the new drive? Does it appear in teh ACU as an un-used drive?

Do you have a Hot Spare drive configured for the existing array?

Have you tried re-seating the drive?


Steven
Steven Clementi
HP Master ASE, Storage, Servers, and Clustering
MCSE (NT 4.0, W2K, W2K3)
VCP (ESX2, Vi3, vSphere4, vSphere5, vSphere 6.x)
RHCE
NPP3 (Nutanix Platform Professional)