Disk Arrays
cancel
Showing results for 
Search instead for 
Did you mean: 

A3311A HASS / A4800A SCSI Adapter

James Winterfeld
Occasional Visitor

A3311A HASS / A4800A SCSI Adapter

Can I use a A4800A SCSI Adapter in an HP Netserver LD Pro to connect to a A3311A HASS?

I am trying to use my old equipment.

Thanks for any help.
3 REPLIES
David Navarro
Respected Contributor

Re: A3311A HASS / A4800A SCSI Adapter

Hi, I Don't know which type of interface is your A4800A, but a hass is just a dumb box, if your interface match disks plugged into hass box, it will be enough. Of course it can be out of support also.

Good Luck
Insu Kim
Honored Contributor

Re: A3311A HASS / A4800A SCSI Adapter

In the configuration guide, A4800A is a PCI FWD SCSI-2 interface disigned for HP V, N and L class and is used to connect HVD scsi devices.
That is, It supports only HP9000/3000 systems.
But if I were in your shoes, I would give it a try and see if what it will happen.

Best regards,
Never say "no" first.
Sanjay_6
Honored Contributor

Re: A3311A HASS / A4800A SCSI Adapter

Hi James,

Give it a try as In-Su Kim is suggesting. It might work. About the HASS, if the channel is supported it should work. Like David said, it is a dumb box.

Hope this helps.

thanks