Disk Arrays
cancel
Showing results for 
Search instead for 
Did you mean: 

A3312A rack and 9.1df's mate w/ AIC ultra 160/m SCSI board?

David Gerhart
Occasional Contributor

A3312A rack and 9.1df's mate w/ AIC ultra 160/m SCSI board?

Will my Rack enclosure A3312A with 9.1df's work with an AIC ultra 160/m SCSI interface aboard a W2K server?

Point me in the right direction?


What you do speaks so loudly I cannot hear what you say -- H.D. Thoureau.
4 REPLIES
Patrick Wallek
Honored Contributor

Re: A3312A rack and 9.1df's mate w/ AIC ultra 160/m SCSI board?

I kind of doubt it.

The A3312A is either SE (Single ended) or FWD (Fast-Wide Differential) so I kind of doubt that it would work with Ultra 160.

A. Clay Stephenson
Acclaimed Contributor

Re: A3312A rack and 9.1df's mate w/ AIC ultra 160/m SCSI board?

No, but you could get an Adaptec AHA-2944UW to allow you to use the HVD SCSI disks in your JBOD.
If it ain't broke, I can fix that.
David Gerhart
Occasional Contributor

Re: A3312A rack and 9.1df's mate w/ AIC ultra 160/m SCSI board?

Thanks, gents.

I suppose my last hope would be the Symbios Logic controller aboard my HP Kayak (its given as a 53c8XX.) Will this run WFD or SE? It's got a Quantum Atlas 10K2-Ty184L attached now.

Thanks again,

David G.
What you do speaks so loudly I cannot hear what you say -- H.D. Thoureau.
Stefan Saliba
Trusted Contributor

Re: A3312A rack and 9.1df's mate w/ AIC ultra 160/m SCSI board?

The 53c8xx is SE narrow. You cannot then I guess !!

Good luck
stefan