Disk Arrays
cancel
Showing results for 
Search instead for 
Did you mean: 

ACU-CLI for hpux

jfsardon
Occasional Contributor

ACU-CLI for hpux

Hi !
I'm installing a new msa1000 active/active on my hpux (rx6600) box with 2 hbas direct attachment.
Previously I create the raid group and the LUN from an Windows Box.

1) I can't see a msa line in the ioscan output
Any idea ?
2) Where can I download the MSA-CLI and ACU for hpux 11iv2 ? I saw nothing for hpux on the msa pages.

JF
3 REPLIES
Andrew Rutter
Honored Contributor

Re: ACU-CLI for hpux

hi,

you cannot downlaod the cli, this is built into the MSA1000 box. You access it through the serial port and can configure/view the storage and controllers here.

see this link for details of how to use it

http://h20000.www2.hp.com/bc/docs/support/SupportManual/c00683579/c00683579.pdf

I dont believe there is a ACU for hpux like there is for windows either.

once the luns are created you should see these in your ioscan output.

Andy


jfsardon
Occasional Contributor

Re: ACU-CLI for hpux

OK, I use the built-in CLI.
Thanks
christoph ernst_4
Occasional Visitor

Re: ACU-CLI for hpux

CLI for HP-UX is available on the "hp StorageWorks modular Smart array 1500 cs Active/Active Support Software CD" which can be downloaded from the HP driver&software website.

christoph