Disk Arrays
cancel
Showing results for 
Search instead for 
Did you mean: 

ACU Controller State "Refresh"

John van_2
Frequent Advisor

ACU Controller State "Refresh"

Hi,

I have a 6402/128 array controller in a DL320 server. Attached to the 6402/128 is a
MSA30. I have previously setup a RAID 5 configuration using ACU. (3x300GB SCSI drives)

Now when I open ACU, the Controller State is continually blinking "Refresh" and doesn't show the actual Status. Any ideas on what is happening here?