1748134 Members
3629 Online
108758 Solutions
New Discussion

ACU

 
Ayman Altounji
Valued Contributor

ACU

I just got a ML530, with a Smart Array 3200 from another division of my company. The system was COMPLETELY wiped clean, including de-configuring the array controller, which comes up with a 1785 error on boot. The only ACU I can find wants to run under Win32. I can't find one that will run under DOS, so that I can create the array.

How can I configure this array? Thanks!

TomK
1 REPLY 1
Ayman Altounji
Valued Contributor

Re: ACU

Follow Up -
I found the ACU. The previous owners sent me the SmartStart CD, and the array is configured. The next problem is that I can't find NT4 drivers for the SA-3200. Can somebody point me at them? I've looked everywhere I can think of.

Thanks again!

TomK