HPE Community
Disk Enclosures
1752758 Members
5034 Online
108789 Solutions
New Discussion юеВ

Add RAID Controller for host 2nd array

 
Arakattack_1
Advisor

тАО05-21-2007 02:06 PM

тАО05-21-2007 02:06 PM

Add RAID Controller for host 2nd array

Hello,

I have SA532 with 2x36gb RAID0 and a MSA30 connected to it with 3x300gb RAID5 harddisk.

It's configured like this
/dev/cciss/c0d0
/dev/cciss/c0d1

What i want to do is adding new controller SA642 to take over /dev/cciss/c0d1.

How to do make it happen?

Do i have to change fstab entry?

Thank you,
Yunata Oct
0 Kudos
3 REPLIES 3
Torsten.
Acclaimed Contributor

тАО05-22-2007 01:19 AM

тАО05-22-2007 01:19 AM

Re: Add RAID Controller for host 2nd array

What is your OS???
Any volume manager in use?

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
0 Kudos
Arakattack_1
Advisor

тАО05-22-2007 01:16 PM

тАО05-22-2007 01:16 PM

Re: Add RAID Controller for host 2nd array

Sorry forget to mention:
OS: Redhat Enterprises 4
Hardware: HP Proliant ML310G3
1st controller: Smart Array 532
currently managing 2 internal RAID0 scsi disk and
3 RAID5 external disk in external disk enclosure HP MSA30

I want to add 2nd controller which is Smart Array 642 to take over 3 RAID5 external disk in external disk enclosure HP MSA30.

Thank you
0 Kudos
Arakattack_1
Advisor

тАО09-01-2007 10:17 PM

тАО09-01-2007 10:17 PM

Re: Add RAID Controller for host 2nd array

New raid controller will auto detect array config attached on the disk. Power down server before installing controller.
0 Kudos
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.