Disk Enclosures
1748092 Members
5989 Online
108758 Solutions
New Discussion юеВ

Re: Add several disk to a HP VA 7100

 
SOLVED
Go to solution
Jos van der Vliet
New Member

Add several disk to a HP VA 7100

Hi,
We have a HP VA 7100 and we want to add 6 new disks. I was wandering, do I have to add the disks one at the time and wait a while before I add the next? Or can I add them all together?
3 REPLIES 3
Bernhard Mueller
Honored Contributor
Solution

Re: Add several disk to a HP VA 7100

Jos,

you do not have to wait until the first is re-formatted until you add the second, third etc.

Run armdsp -a and make sure your VA has no Warning state and also do this at off-peak times.

The LEDs should start flashing on the disk, but I prefer to add only one first, then check armdsp -a (or similar) to see the disk is being included/formated before I go on.

Regards,
Bernhard
Jos van der Vliet
New Member

Re: Add several disk to a HP VA 7100

Oke, Thanks for yor message.
Jos van der Vliet
New Member

Re: Add several disk to a HP VA 7100

There can be added more then one disk at the time.