Disk Arrays
cancel
Showing results for 
Search instead for 
Did you mean: 

Added disks and shelves to EVA 6000

Tim Gordon
Advisor

Added disks and shelves to EVA 6000

Hi,

We had an EVA 6000 with 2 controllers and 4 shelves (fully populated) - RSS was showing as mirrored. We have now added another 4 shelves, again fully populated with disks, and added these disks to our single disk group. RSS state is now showing as None. Is this something that I should be worried about? Will it sort itself out or should I be a bit more proactive with my worrying?

TIA

Tim
4 REPLIES
Uwe Zessin
Honored Contributor

Re: Added disks and shelves to EVA 6000

The EVA has at least one disk mirror pair located in one disk drive enclosure. As far as I can tell, there is currently no function in the controller software which can fix this.

I have created an analyzer for such situations. While I can't share it, I am willing to do an analysis for you if you can provide me with the output of the following SSSU commands:

> ls controller full XML
> ls disk full XML
> ls diskshelf full XML
> ls disk_group full XML

Please save in a .TXT file and attach - do not cut&paste inline, thanks.
.
Tim Gordon
Advisor

Re: Added disks and shelves to EVA 6000

Oh Thanks.

I'm not at the site right now but here is similar that I produced on Saturday.
Uwe Zessin
Honored Contributor

Re: Added disks and shelves to EVA 6000

I am sorry, but I can only process XML (preferred) or the old-style SSSU 'show' output.
.
Tim Gordon
Advisor

Re: Added disks and shelves to EVA 6000

I'll get it in the next few days.

Tim