Disk Arrays
cancel
Showing results for 
Search instead for 
Did you mean: 

Adding disks to Smart Array

SOLVED
Go to solution
Markku Rintala
Occasional Visitor

Adding disks to Smart Array

I need to add two disks into running Proliant server. Where could I find instructions to that?

I have a ProLiant ML370 G3 server with SA 532 Wide-Ultra3 RAID -controller and two 36.4 GB Pluggable Ultra320 SCSI disks. RAID level is 1.

The two disks are now devided into three logical drives (C, D and E). Operating system Windows 2000 server is located on C.

I have purchased two similar (36.4 GB Pluggable Ultra320 SCSI) disks in order to add them to the array. The new space would be devided for logical disks D and E.

Where I could find pretty precise instructions to configure the RAID controller and add the new disks into it? I haven't done that before, and there is only few hours to do the thing.

Thanks in advance!
- Markku
1 REPLY
Steven Clementi
Honored Contributor
Solution

Re: Adding disks to Smart Array

Markku:

This doc should suffice... http://h200002.www2.hp.com/bc/docs/support/SupportManual/c00142272/c00142272.pdf


It has the basics in it. You will probably also need diskpart.exe. Info found here http://support.microsoft.com/default.aspx?scid=kb;en-us;325590

Basic steps...

1. Insert drives into drive bays.
2. Expand Array with addition drives, one at a time.
3. Extend Logical drives (in ACU) one at a time
4. Use Diskpart.exe to extend Windows Volumes after Logical Drive Expansion is complete.


Steven
Steven Clementi
HP Master ASE, Storage and Clustering
MCSE (NT 4.0, W2K, W2K3)
VCP (ESX2, Vi3, vSphere4, vSphere5)
RHCE
NPP3 (Nutanix Platform Professional)