Disk Arrays
cancel
Showing results for 
Search instead for 
Did you mean: 

Adding drives to autoraid

SOLVED
Go to solution
Error_1
Occasional Advisor

Adding drives to autoraid

I want to upgrade to 18gb drives on my autoraid
is there anything i need to don other then add them.. any other hardware to buy ie?

high speed fans?
is there cache limitations or minimums
Why is abbreviation such a long word?
2 REPLIES
A. Clay Stephenson
Acclaimed Contributor
Solution

Re: Adding drives to autoraid

The answer is it depends. If you buy the 7200 RPM version of the 18GB's then no you can keep the old fans but if you buy the 10,000 RPM versions then you must replace the fans. If the little fan labels are flat you have the lo-speed fan modules; the hi-speed fans have a raised 'bubble' label where the little fan is.

I would seriously consider upgrading to the 36GB drives. The cost isn't much different and the increase in capacity is quite large. If your AutoRAID is getting to near 3 years in age, you probably need to replace the controller batteries.

Clay
If it ain't broke, I can fix that.
A. Clay Stephenson
Acclaimed Contributor

Re: Adding drives to autoraid

Sorry, I missed the cache question. Your controllers should already have 96MB of cache installed. When you replace the drives, the process is very simple. The 12H should be 'Ready'. This assumes that 'Auto Include Disk' is enabled.

while NEW_DISKS > 0
1) Remove ONE drive
2) Insert New Drive
3) Wait for light show to quit (which can take some time) and Drive displays 'Ready Again'
NEW_DISKS--

Regards, Clay
If it ain't broke, I can fix that.